Description
SANI-CLEAN – Cleaning and Sanitising Solution LR-900 (5 Litres)
For use with our fogging machines! Using the suggested 1 to 9 ratio solution, you’ll produce 45 litres of solution.
This cleaner has been trialled and tested by KIC Machines and has been scientifically tested as a broad spectrum bactericidal, fungicidal, viricidal cleaner that has been proven to eliminate 99.999% of bacteria.
Fogging:
Sani-Clean is suitable for disinfecting hard, nonporous surfaces as an adjunct to cleaning and disinfecting of room surfaces.
1) Before fogging remove or protect all food products and packaging materials. Remove all animals and other livestock from the area to be fogged.
2) Be sure the room is properly ventilated. All personnel must vacate the room during fogging and for at least two hours following the fogging treatment. Before personnel return to the treated area make sure there is no strong odour of acetic acid (vinegar) present.
3) Fog at 34 grams per cubic meter of room area using the appropriate dilution below.
Dilute with cold water accordingly,
Recommended dilution suitable for all uses.
Instructions for Bacterial Disinfection
Fogging PPM
Sani-Clean 100ml Sani-Clean + 10L water 200ppm
Instructions for Fungicidal Disinfection
Fogging PPM
Sani-Clean 1000 ml Sani-Clean + 10L water 2000ppm
Instructions for Virucidal Disinfection
Fogging PPM
Sani-Clean 350ml Sani-Clean + 10L water 700ppm
————————————————————————————————–
Apply by Spray, Mop,Swab or Sponge.
If applying by spray ensure good ventilation of the area
Dilute with cold water accordingly:
Recommended dilution suitable for all uses.
Instructions for Bacterial Disinfection
Surface disinfection PPM
Sani-Clean 100ml Sani-Clean + 10L water 200ppm
Instructions for Fungicidal Disinfection
Surface disinfection PPM
Sani-Clean 1000ml Sani-Clean + 10L water 2000ppm
Instructions for Virucidal Disinfection
Trade product Surface disinfection PPM
Sani-Clean 350ml Sani-Clean+ 10L water 700ppm
Reviews
There are no reviews yet.